Home | Resources | Cleaning & Disinfection Guides

Cleaning & Disinfection Guides

Cleaning and disinfection, explained.

Guides on washroom cleaning, high-touch surfaces, contamination control and cleaning schedules.

In this topic

What we cover.

The questions facility managers ask us most, grouped into plain-English guides.

Washroom cleaning

What a thorough washroom clean includes.

High-touch surfaces

Cleaning and disinfecting shared touchpoints.

Contamination control

Workplace routines that reduce spread.

Cleaning schedules

Planning cleaning around your site.

Cleaning & Treatment Guide
Washrooms and high-touch surfaces.

A washroom can look clean and still carry germs on the surfaces people touch most. Effective hygiene depends on cleaning the right surfaces, in the right order, with the right products, often enough.

This guide explains the difference between cleaning and treatment, identifies high-touch surfaces, and gives a practical schedule for commercial washrooms.

Cleaning vs Treatment
  • Cleaning removes dirt, grime and most germs using detergent and water. It follows treatment.
  • Treatment uses a chemical disinfectant combined with steam at 120 °C to kill germs and bacteria on the surface. It’s the bacteria that cause odour.

Cleaning doesn’t work well on untreated surfaces, so skipping the treatment step makes cleaning less effective. The rule is simple: treat first, then clean.

High-touch surfaces in a washroom

These surfaces are touched by almost every user and should be treated and cleaned at least daily, and more often in busy sites:

  • Door handles, push plates and locks
  • Cubicle latches
  • Tap handles and basin edges
  • Flush buttons and handles
  • Toilet seats
  • Soap, towel and sanitiser dispenser levers
  • Sanitary bin lids (unless touch-free)
  • Baby change tables and safety straps
  • Light switches and hand dryer buttons

Touch-free fixtures reduce how many of these surfaces exist in the first place.

A practical washroom cleaning schedule

Frequency

Tasks

Several times a day (busy sites)

Spot check, restock consumables, clear spills, wipe high-touch points

Daily

Treat and clean toilets, urinals, basins and high-touch surfaces; mop floors; empty general bins; clean mirrors

Weekly

Clean walls around fixtures, partitions and doors; descale taps; wipe dispensers inside and out

Monthly

Clean vents and exhaust grilles; scrub grout; check floor wastes

Periodically

Deep clean and machine-scrub floors; high-level dusting; tile and grout restoration

Adjust frequency for traffic. A stadium washroom on event day needs far more than an office washroom on a Friday.

Best-practice cleaning method
  1. Work top to bottom so dirt falls onto areas not yet cleaned.
  2. Work clean to dirty, finishing with toilets and urinals.
  3. Use colour-coded cloths and mops so toilet cloths never touch basins or benches. A common scheme is red for toilets and urinals, yellow for basins, blue for general surfaces and green for food areas.
  4. Follow contact time on the disinfectant label. Most need to stay wet on a surface for a set time to work.
  5. Ventilate while cleaning and keep chemicals stored and labelled.
  6. Record the clean on a visible log so users and managers can see when it was last done.
Choosing products
  • Use a neutral detergent for general cleaning
  • Use a hospital-grade or TGA-listed disinfectant where infection control matters, such as healthcare, aged care and childcare
  • Avoid mixing chemicals, particularly bleach with acids or ammonia
  • Choose products that suit your surfaces, since some damage stone, stainless steel or sealed timber
  • Keep safety data sheets for every chemical on site
Where cleaning and hygiene services meet

Cleaning and hygiene services work best together, but they are often run by different contractors. Make clear who does what:

Task

Usually cleaners

Usually hygiene provider

Daily surface treatment and clean

Yes

 

Restocking toilet paper and towels

Yes

 

Sanitary and nappy unit service

 

Yes

Air care refills and maintenance

 

Yes

Soap and sanitiser cartridges

Sometimes

Yes

Urinal Treatment

 

Yes

Dispenser repairs

 

Yes

When these responsibilities are written down in a current service level agreement (SLA), gaps disappear.

Signs your cleaning isn’t working
  • Odour returns within hours of a clean
  • Limescale, mould or stained yellow grout around fixtures
  • Sticky or marked dispensers and door plates
  • Complaints that don’t match the cleaning log
FAQs
Common questions.

Can’t find what you’re looking for? Call our team on 1800 505 929.

What’s the difference between cleaning and treatment?

Treatment uses a disinfectant with steam to kill germs and the bacteria that cause odour. Cleaning then removes dirt and grime.

How often should washroom surfaces be treated?

High-touch surfaces at least daily, and several times a day in high-traffic sites.

Does touch-free equipment reduce cleaning?

It reduces the number of surfaces users touch, which lowers cross-contamination risk. Surfaces still need regular cleaning.

Should cleaners empty sanitary bins?

No. Sanitary and nappy units should be serviced by a hygiene provider using sealed exchange or liner systems.

Latest guides

Latest articles.

New guides for this topic are on the way. In the meantime, call us on 1800 505 929 with any questions.
Put it into practice

Ready for cleaning & disinfection?

Shmik Hygiene works alongside your cleaning team to service sanitary units, air care and dispensers, so every part of your washroom is covered. Call 1800 505 929 or email service@shmik.com.au to talk to our team.