Guides on touch-free sanitary bins, smart bin monitoring, nappy waste and servicing for commercial washrooms.
The questions facility managers ask us most, grouped into plain-English guides.
How touch-free units work and why they matter.
Waste-level sensors and usage-based servicing.
Managing feminine hygiene waste in the workplace.
Choosing nappy disposal for family facilities.
How often units should be serviced, and why.
Every washroom used by women, and every all-gender or accessible toilet, needs a hygienic way to dispose of sanitary items. Get it right and nobody notices. Get it wrong and you have overflowing bins, odour, complaints and a compliance gap.
This guide covers what sanitary disposal involves, what Australian workplaces are expected to provide, how touch-free and smart bins differ from standard units, and how to set up nappy waste disposal in baby change areas.
Sanitary disposal is the collection, containment and removal of used period products such as pads, tampons and liners. In a commercial washroom this usually means a dedicated sanitary bin in each cubicle, emptied and replaced on a set schedule by a hygiene provider.
A professional service typically includes:
Workplace health and safety guidance across Australia expects employers to provide a hygienic means of disposing of sanitary items in toilets used by female workers.
In practice, the simplest standard to apply is one sanitary unit in every female cubicle, every accessible toilet and every all-gender toilet. If you are unsure what applies to your site, check the current code for your state or ask our team for a site assessment.
Older sanitary units use a foot pedal or a hand-lifted lid. Both work, but both mean contact with a surface that every user touches.
Touch-free units open when a sensor detects a hand near the bin. The user never touches the lid. That matters for three reasons:
Feature
Pedal bin
Manual lid bin
Touch-free bin
Contact with unit
Foot
Hand
None
Moving parts that wear
Pedal and hinge
Hinge
Sensor-driven lid
Suited to tight cubicles
Sometimes
Yes
Yes (slim profiles)
Usage data
No
No
Yes, with SanIQ
A standard service runs on a fixed calendar. Your bins are exchanged every week or fortnight whether they are a quarter full or overflowing.
Shmik’s SanIQ touch-free unit adds monitoring to that service:
The result is a service matched to how your washrooms are actually used. High-traffic cubicles get attention sooner. Quiet ones are not over-serviced. Our approach moves away from the traditional fixed service model where you may be paying for a service you don’t need.
Any site with a baby change area needs a dedicated nappy bin. Nappies are bulkier and more odorous than sanitary waste, so a general rubbish bin is not suitable.
Good nappy disposal setups include:
There is no single right answer. It depends on the number of users, opening hours and the type of site. As a starting point:
Site type
Typical starting frequency
Busy retail, hospitality and venues
Weekly
Schools and education
Weekly to fortnightly (term-based)
Corporate offices
Fortnightly
Low-use or small workplaces
Monthly
With smart monitoring, these frequencies become a baseline rather than a guess. Usage data shows where to increase or reduce visits.
Ask any provider these questions:
Our Melbourne team can assess your site and recommend the right setup. No obligation.
Workplace health and safety guidance expects a hygienic means of sanitary disposal in toilets used by female workers, and WorkSafe Victoria’s guidance says all-gender toilets should have one too. Check the code that applies in your state.
It is not recommended. A dedicated, lidded sanitary unit contains odour, protects cleaners from contact with the waste and gives users privacy.
No. SanIQ units connect to a standalone Shmik IoT Gateway with its own 4G modem, so nothing touches your internal network.
The SanIQ touch-free unit is designed for sanitary or nappy waste. For high-use baby change rooms we will recommend a higher capacity unit and service frequency during the site assessment.
One Shmik IoT Gateway connects up to 36 SanIQ, ScentIQ® or SoapIQ units.
Shmik Hygiene installs and services touch-free, smart-monitored sanitary and nappy bins for businesses across Melbourne and Victoria. Call 1800 505 929 or email service@shmik.com.au to book a free site assessment.