Guides on washroom cleaning, high-touch surfaces, contamination control and cleaning schedules.
The questions facility managers ask us most, grouped into plain-English guides.
What a thorough washroom clean includes.
Cleaning and disinfecting shared touchpoints.
Workplace routines that reduce spread.
Planning cleaning around your site.
A washroom can look clean and still carry germs on the surfaces people touch most. Effective hygiene depends on cleaning the right surfaces, in the right order, with the right products, often enough.
This guide explains the difference between cleaning and treatment, identifies high-touch surfaces, and gives a practical schedule for commercial washrooms.
Cleaning doesn’t work well on untreated surfaces, so skipping the treatment step makes cleaning less effective. The rule is simple: treat first, then clean.
These surfaces are touched by almost every user and should be treated and cleaned at least daily, and more often in busy sites:
Touch-free fixtures reduce how many of these surfaces exist in the first place.
Frequency
Tasks
Several times a day (busy sites)
Spot check, restock consumables, clear spills, wipe high-touch points
Daily
Treat and clean toilets, urinals, basins and high-touch surfaces; mop floors; empty general bins; clean mirrors
Weekly
Clean walls around fixtures, partitions and doors; descale taps; wipe dispensers inside and out
Monthly
Clean vents and exhaust grilles; scrub grout; check floor wastes
Periodically
Deep clean and machine-scrub floors; high-level dusting; tile and grout restoration
Adjust frequency for traffic. A stadium washroom on event day needs far more than an office washroom on a Friday.
Cleaning and hygiene services work best together, but they are often run by different contractors. Make clear who does what:
Task
Usually cleaners
Usually hygiene provider
Daily surface treatment and clean
Yes
Restocking toilet paper and towels
Yes
Sanitary and nappy unit service
Yes
Air care refills and maintenance
Yes
Soap and sanitiser cartridges
Sometimes
Yes
Urinal Treatment
Yes
Dispenser repairs
Yes
When these responsibilities are written down in a current service level agreement (SLA), gaps disappear.
Our Melbourne team can assess your site and recommend the right setup. No obligation.
Treatment uses a disinfectant with steam to kill germs and the bacteria that cause odour. Cleaning then removes dirt and grime.
High-touch surfaces at least daily, and several times a day in high-traffic sites.
It reduces the number of surfaces users touch, which lowers cross-contamination risk. Surfaces still need regular cleaning.
No. Sanitary and nappy units should be serviced by a hygiene provider using sealed exchange or liner systems.
Shmik Hygiene works alongside your cleaning team to service sanitary units, air care and dispensers, so every part of your washroom is covered. Call 1800 505 929 or email service@shmik.com.au to talk to our team.